UNIBOND 800 UREA Adhesive Quart dark colorHome > Supplies > UREA Formaldehyde Adhesive-UNIBOND 800
To assure the best bond possible The Nelson Paint Company is now supplying Unibond 800, a two part liquid urea resin glue for use with the VacuPress or without! Urea resin is the industry standard for veneering glues, but most require high temperature for proper bonding. Unibond 800 has been formulated to provide the same bond quality at room temperature, making it an excellent choice for vacuum pressing or clamping.
Unibond 800 is a modified urea resin formaldehyde two part adhesive with a translucent liquid resin and a powdered catalyst. Unibond 800 is designed to provide a rigid, gap filling glue line with faster than usual set times.
Veneering flat and curved parts.
Bonding plastic laminates.
Laminating curved panels and bent laminations.
Assembly glue for furniture, cabinets, and general joinery.
Rigid glue line - Eliminates crazing and cold creep.
Low pressure bonding - Excellent gap-filling abilities up to 0.02.
Highly water resistant - Good for moisture sensitive areas.
Neutral tan color - Suitable for lighter and medium tone woods. Availible in dark for deep tone woods. White and dark brown tints are availible for extremely blond woods as well as extra dark ones - One 8 oz. bottle of tint will color a full 5 gallon pail at full strength.
Adjustable set time - Set times can be altered by temperature and mixing ratios.
Excellent open assembly time - Perfect for large panels and multi-layered laminations where clamping pressure may be delayed.
Mixes easily - Does not lump - and cleans up with soap and water.
Low shrinkage - For maximum panel stability.
2 hrs at 65° F
1 hr at 75° F
45 min at 85° F
30 min. at 95° F
OPEN ASSEMBLY TIME
45 min at 70° F
30 min at 80° F
15 min at 90° F
3 hrs at 70° F
2 hrs at 80° F
1 hr at 90° F
12 mos at 60° F
6 mos at 75° F
3 mos at 90° F
(The above times are approximate and also are affected by mixing ratios.)
To assure proper bonding, Unibond 800 should not be used below 70° F